The electric heater TO 5 UP is designed for preparation of hot water in households, cottages and various welfare facilities. It allows installation of only one hot water consumption point. Its benefit is that it heats up water by power in an unlimited all-day time range.
Electric water heater Dražice TO 5 UP
Declared load profile: XXS
Energy efficiency class 1): A
Water heating energy efficiency (ƞwh) 1): 35,2 %
Annual electricity consumption 1): 525 kWh
Daily electricity consumption 2): 2,480 kWh
Thermostat temperature settings: e
Value of "smart": 0
Volume: 6,6 l
Rated pressure: 0,6 MPa
Weight / Filled with water: 6,8 (11,8) kg
Power of electrical heater: 2000 W
Heating time from 10 °С to 65 °С: 11 min
Electric connection: 1 PE-N 230V/50HZ V
Protection class: I
Degree of protection: IP 24
Packaging dimensions: 300 x 300 x 440 mm
It is recommended to use the product in indoor environment with air temperatures from +2°C to 45°C and a relative humidity up to 80%.
The heater tank is steel enamelled for pressure connection, the electric heating element is copper. The heater tank consists of magnesium anode that helps protect the heater tank from corrosion. The heater tank is provided with a valuable polyurethane insulation, all is stored in an upper plastic container. Electric wiring is placed in the bottom (upper) part of the heater, under the removable guard of the heater. Temperature of water can be set by a thermostat within the range between 5 °C and 75 °C, using the symbols on the thermostat selector button (read more in chapter 13). Cold water inflow is indicated with a blue ring, hot water outflow is indicated with a red ring.
Prior to mounting check the loading capacity of the wall. If needed, reinforce it. Mount the water heater in vertical position only. The fastening screws must have guaranteed spacing of 140 mm.
OPERATING AND INSTALLATION MANUAL