Boiler Centrometal EKO-CK P 110 kW

The application of well developed and thoroughly tested technical solutions makes this boiler safe and reliable. A particular feature of this boiler is the ease of integration of any suitable burner and boiler controls.

Characteristics of EKO-CK P 110 kW boiler

• Hot water boiler for central heating systems is produced for solid fuel, pellets, oil or gas firing
• A carefully sized combustion chamber with triple pass flue gas flow assure boiler operation at high efficiency. This makes the boilers very economical to use.
• The combustion chamber is made out of high quality 5 mm thick steel sheet. The large door and combustion chamber enable firing with big pieces of wood, as well as easy cleaning and maintenance.
• The direction the upper and lower doors swing is easily reversed.
• If required a thermal safety system can be built in through already prepared apertures.
• A thermostat for pump control is built in.
• The body of the boiler is delivered separately from the casing and the thermal insulation which enables easier transportation and assembly with reduced risk of damage.
• The basic standard boiler is delivered with a boiler water temperature gauge as well as a cleaning set with an ashtray.
• In the Cm Pelet-set of the boiler fired with wood pellets, there is a set for installation of a pellet burner on the lower boiler door, turbulators,  a pellet burner,  pellet container, pellet  feeder and boiler regulation.
• If it is fired with oil or gas, a set for installation of an oil/gas burner and turbulators (their number depends on the power of the boiler) are required.
• The basic boiler regulator control unit of the burner (for oil/gas firing) is delivered separately. It can be connected via the upper casing lid of the boiler.
• The boiler is tested and certified to the European standard EN 303-5 and EN 304 and manufactured in accordance with ISO 9001 and ISO 14001 standard.

Heat output range: 90-110 kW
Boiler water content:  157 l
Boiler mass: 492 kg
Diamet.*/height(G)of uptake tube: 200/1085 mm
Opening for the burner (hxw): 210x165 mm
Upper door opening (hxw): 521x275 mm
Lower door opening (hxw): 521x422 mm
Chimney draught: 31 Pa
Boiler water Inlet/Outlet: 2" (R)
Filling/Draining: 1" (R)
Flue gas temp. (o / g): 200 °C
Flue gas temp. (wood): 240 °C
Max. operat. temperature: 90 °C
Max. operat. pressure: 2,5 bar

Basic dimensions of EKO-CK P 110 kW boiler

Boiler EKO-CK P ja EKO-CKB P Cm Pelet-set

Centrometal catalogue (25 MB)

Boiler EKO-CK manual (RUS)