List of products by supplier REGULUS spol. s r.o.
Heating system components, solar water heating, controllers, thermostats, measurementm etc
Stainless-steel anchor for pantiles
Solarten super, 10 l packing. Antifreeze fluid for Regulus Solar Collectors.
Solarten super, 25 l packing. Antifreeze fluid for Regulus Solar Collectors. Freezing point -28 °C, max. working temperature +230 °C (up to 2,5 MPa), short overheat +300 °C
Ball valve for solar systems, G 3/8" M/F, up to 160°C, under an air vent valve
Encased adjustable capillary thermostat, 0-300 °C, 2 m capillary, INOX sensor, IP 40.
Connection kit for flat plate solar collector array 1 KPG1 (KPC1, KPA1, KPS11 and KPH1).
Encased adjustable contact thermostat, 20-90°C, heat conducting paste incl.
Double encased immersion thermostat with external adjustments 0-60/30-120 °C Regulus
Electric-controlled combustion air regulator for solid-fuel boilers. It controls the working fluid flow temperature from a heat source to a value set by the knob.
Encased adjustable capillary thermostat, 0-90 °C, 1 m capillary, IP 40, Regulus
REGULUS Flat Plate Solar Collectors are designed for solar domestic hot water heating (DHW), backup- and pool heating with solar energy. Solar radiation penetrates the glass and is intercepted by an efﬁ cient...
Solar collector KPG1H, for landscape installation aperture area 2.39 sqm, fluid volume 1.7 l, output 1816 W, silver aluminium frame, solar prismatic glass, double harp-type absorber with highly selective TiNOx surface...
Heating coil surface area: 3,6 m² (sqm), Regulus. 10 bar, 95 °C
Mount and interconnection kit for flat plate solar collector 2xKPG1
Mount and interconnection kit for flat plate solar collector 3xKPG1 collectors
Mount and interconnection kit for flat plate solar collector 4 KPG1 collectors
Mount kit for a evacuated tube solar collectors 1 KTU 15 (9R)
Mount kit for landscape installation of 1xKPG1 solar collector
4-sensor controller for use with solar thermal systems with one collector array and up to 2 solar consumers or 2 independent arrays and one solar consumer, with PWM/0-10V output for high-efficiency pumps, 3 Pt1000...